- Razor wire does not need to cost too much, even though it is more expensive than barbed wire, but if it covers areas of the same length, the cost of wire and blade materials is lower than that of other types of fences.
Product Details
Product Description
Main specifications for razor wire
1. Material:
Carbon steel, Stainless steel (304, 304L, 316, 316L, 430).
Stainless steel is the best material, but it is expensive.
Usually galvanized steel is used.
2. Surface treatment:
Hot-dip galvanized, Electro-galvanized, Powder coating
Hot-dip galvanizing is more durable than electro-galvanizing, but electro-galvanizing is cheaper.
Powder coating can customize colors. (Usually green)
3. Wire diameter:
Core wire diameter: 2.0-2.5mm.
4. Available of blade types:
BTO-10, BTO-12, BTO-18, BTO-22, BTO-25, BTO-28, BTO-30, CBT-60 and CBT-65.
5. Coil diameter range:
Concertina wire coil diameter range (coil size): 450mm-1500mm.
6. Clips per coil:
3-5 clips.
Some razor wire types don’t use clips such as spiral razor wire.
7. Loops per roll:
30-108 loops.
8. Stretch length of per roll:
10-25m.
This is the maximum stretching range. Overstretching may cause damage to the coil.
9. Weight of per roll:
5-20kg.
Advantages of razor wire for barrier protection
Economic Product
High Security
The razor wire blade is very sharp, so its protective performance is very high. Rigid and sharp blade frightens or hurts any person or animal that want to go through the razor wire fence.
Expansibility
Long Service Life
Easy Installation and Low Maintenance
Field Adaptability
Unlike other metal fences, razor wire products are characterized by good adaptability to installation sites. the fluid shape can make the concertina razor wire can be set in different site conditions such as hillside mountain or desert.
Installation and Application
Installation types: Tie Wire. Barb Arm. Welding.
Razor wire should be installed by trained and experienced workers with a strong sense of responsibility, in addition, protective equipment such as puncture resistant gloves and sleeves are essential when installing razor wire. Failure of installation or misuse may cause serious injury.
Packaging details of razor wire product
The packing concertina razor wire needs a lot of labor because each of the concertina razor wire coils is packed independently. The independent package is very necessary because of the shape razor blade will be crossed and cannot be separated if the razor tough together. First, need to pack the concertina razor wire with waterproof paper. The waterproof paper can prevent the water go into the concertina razor wire coil if raining. Then wrapped the coil with a plastic belt. The plastic belt is to prevent people’s finger from cutting when they carry it because of the blade is sharp and dangerous.
(1) Per coil razor barbed wire be packed waterproof paper inside with plastic belt wrapped or woven bag outside. Then 50 coils or 100 coils be a bundle with steel strip. Or as customers’ requirement to pack to pallet or carton box.
(2) Razor barbed wire can be loaded to containers in bulk( that is one by one), but this package will lose the quantity for one container.
(3)Also has customers’ request there is no waterproof paper inside. Just put razor wire directly into a carton.
(4)The package of welded razor mesh is first rolled up and then bound with steel strip.
Different types of razor wires can be packaged in different ways and according to customers’requirements.
Related Recommendation
Live message online
By clicking 'Allow All', you agree to the storage of cookies on your device to enhance site navigation, analyze site usage and assist with our marketing efforts. Coo Cookie Notice
Please give us a message
SHANDONG LUBAO METAL GROUP CO., LTD.